If you have set the resolution to 1200 dpi (Best), change it to 600 dpi (Normal). To adjust the print quality settings, reduce the resolution.

Reduce the complexity of the page(s) or try adjusting the print quality settings.

Use only paper that meets printer specifications. Check that the adjustable guides are set correctly. Remove paper from the tray and reload it correctly. The paper source selection in the printer properties may be incorrect.įor many software applications, the paper source selection is found under the Paper tab within the printer properties. Printer selects print media from the wrong paper source. Try printing a test page.Ĭheck the LEDs on the control panel to determine if the printer is indicating a system error. Reinstall the printer driver See the Software Section. The printer driver may be incorrectly installed. The printer may be configured incorrectly.Ĭheck the printer properties to ensure that all of the print settings are correct. If the computer has more than one port, make sure that the printer is attached to the correct one. You can also try using a different printer cable.Ĭheck the Windows printer setting to make sure that the print job is sent to the correct port. If possible, attach the cable to another computer that is working properly and try to print a document. The connection cable between the computer and the printer is defective.

The connection cable between the computer and the printer is not connected properly.ĭisconnect the printer cable and reconnect it. The printer may be in manual feed mode and out of paper.Īdd paper to the manual tray, and press the Cancel button on the control panel. Select Samsung ML-2510 Series, Samsung ML-2570 Series, Samsung ML-2570 Series PCL 6 or Samsung ML- 2570 Series PS as your default printer. The printer is not selected as the default printer. Check the power switch and the power source. For problems with the operation of your printer, refer to the table for suggested solutions.Ĭheck the power cord connections.

Samsung ml 2510 printer problems